Hotpoint CH60ETC S Instruções de Utilização descarregar pdf (Página 33)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

SOMETHING WRONG

WITH YOUR COOKER

Before contacting your nearest Service Centre/Installer, check the problem guide below; there may be

nothing wrong with your cooker.

Problem Check

Slight odour or small

amount of smoke when grill

/ oven used first time

This is normal and should cease after a short period.

Nothing works

If you find that the timer display is blank, then it is likely that there is no electricity

supply to your oven.

Check:

(i) That the main cooker wall is switched on

(ii) Other appliances, to see if you have had a power cut

(iii) The main circuit breaker for the property

Top oven, grill and main

oven do not work.

Operating the cooker under the following conditions may cause a safety device to

operate:

(a) Grilling with the door closed - Always grill with the door fully open

(b) Grilling for an excessively long period at maximum setting - see Grilling guide.

Switch off appliance and allow to cool for approx 30 mins.

Switch the cooker back on and check that the Grill, Top oven and Main Oven are

now operating.

Grill keeps turning on and

off

When the Grill control is operated, the Grill will cycle on and off, this is normal and

not

a fault.

Timer is flashing '0.00 '

The power supply to your oven has possibly been interrupted, but has now come

back on again. Reset the timer to the correct time of day using the instructions given

in the timer section of the book.

Oven temperatures too

high or low

Check temperature and shelf positions are as recommended in the Oven

Temperature Charts.

It may be necessary to increase or decrease the recommended temperature slightly

to suit your taste.

Oven does not cook evenly

Check:

(a) Temperature and shelf positions are as recommended in the

Oven Temperature Charts.

(b) Oven utensils being used allow sufficient air flow around them.

Oven light does not work

The oven lamp is not covered by the guarantee. The part is easily changed (see the

section 'Replacement of Oven Light').

A new light bulb may be obtained from our Parts department, see back page.

Draught from beneath

control panel

A gentle flow of air will be blown from beneath the control panel when the

appliance is used. If the appliance is still warm, this cooling fan may run on, or

restart itself when all controls have been turned off.

The fan will stop once the appliance has been cooled.

This is normal and not

a fault.

Steam / Condensation in

the oven after use.

Steam is a by - product of cooking any food with a high water contact. To help

minimise always:

a) Try to avoid leaving food in the oven to cool after being cooked.

b) Use a covered container, wherever possible.

The oven is not working

and showing F01 to F68

code in the display

Your appliance has developed a fault which will require assistance from our

service department.

1 2 ... 28 29 30 31 32 33 34 35 36

Comentários a estes Manuais

Sem comentários

Hotpoint CH60ETC S Instruções de Utilização Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Micro-ondas Hotpoint CH60ETC S