Hotpoint NMTM 1912 F (AUS) Instruções de Utilização descarregar pdf (Página 2)

Installation

! Before placing your new appliance into operation

please read these operating instructions carefully.

They contain important information for safe use, for

installation and for care of the appliance.

! Please keep these operating instructions for future

reference. Pass them on to possible new owners of

the appliance.

Positioning and connection

Positioning

1. Place the appliance in a well-ventilated humidity-

free room.

2. Do not obstruct the fan grills. The compressor and

condenser give off heat and require good

ventilation to operate correctly and save energy.

3. Leave a space of at least 10 cm between the top

part of the appliance and any furniture above it, and

at least 5 cm between the sides and any furniture/

side walls.

4. Ensure the appliance is away from any sources of

heat (direct sunlight, electric stove, etc.).

5. In order to maintain the correct distance between

the appliance and the wall behind it, fit the spacers

supplied in the installation kit, following the

instructions provided.

Levelling

1. Install the appliance on a level and rigid floor.

2. If the floor is not perfectly horizontal, adjust the

refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully

place it vertically and wait at least 3 hours before

connecting it to the electricity mains. Before inserting

the plug into the electrical socket ensure the following:

 The appliance is earthed and the plug is compliant

with the law.

 The socket can withstand the maximum power of the

appliance, which is indicated on the data plate

located on the bottom left side of the fridge (e.g. 150

W).

 The voltage must be in the range between the

values indicated on the data plate located on the

bottom left side (e.g. 220-240V).

 The socket is compatible with the plug of the

appliance.

If the socket is incompatible with the plug, ask an

authorised technician to replace it (see Assistance).

Avoid using any extension cord or multiple socket

outlet.

 If this appliances is supplied from an extension

cord or portable electrical outlet device, the

extension cord set or electrical portable outlet

device must be positioned so that it is not subject

to splashing or contact with moisture.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly. If the supply

cord is damaged, it must be replaced by the

manufacturer, its service aagendt or similary qualified

persons in order to avoid s hazard.

! The manufacturer declines any liability should

these safety measures not be observed.

1 2 3 4 5 6 7 ... 11 12

Comentários a estes Manuais

Sem comentários

Hotpoint NMTM 1912 F (AUS) Instruções de Utilização Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com não Hotpoint NMTM 1912 F (AUS)