50
TROUBLESHOOTING GUIDE
The glass ceramic induction hob is not working:
Have you pressed the control buttons following
the instructions in the section using the hob?
Is the power on?
Have you carefully dried the hob after cleaning it?
1.
If a cooking zone has been selected and an
F
appears on the display contact the After Sales
Service and inform them.
2.
If one of the following codes is displayed when
the hob on button is pressed:
E -13 E-22 E-27 E-28 E-29
contact the After Sales Service and give them
the code.
3.
If the booster does not work, the temperature
inside the hob is too high.
Wait a few minutes until the cooking zone
cools off or continue cooking without the
booster (max. level 9).
Cooling fan
The hob is equipped with a cooling fan which runs
at two speeds, depending on the temperature in
the hob. If the hob reaches a level which exceeds
the power of all the hot plates, it is automatically
reduced, or if necessary, the entire hob is
deactivated. After a certain period of time, the hob
automatically returns to the selected temperature.
Important
!
If you are not able to turn the glass ceramic hob
off after using it, disconnect it immediately from
the power supply.
AFTER SALES SERVICE
Before contacting After Sales Service
1.
Try to solve the problem (see Troubleshooting
Guide).
2.
Turn off the appliance and restart it to see if
the fault is repeated.
If after the above checks the fault still occurs,
get in touch with the nearest After Sales
Service.
Please give:
a short description of the fault,
the exact type and model,
the service number (the number after the word
Service on the rating plate) is located on the
underside of the cooktop or on the Product
Description Sheet. the service number is also
indicated on the guarantee booklet,
your complete address and phone number.
If any repairs are required, please contact an
authorised After Sales Service
as indicated in
the warranty.
In the unlikely event that an operation or repair is
carried out by an
unauthorised technician
,
always request a certification of the job carried
out and insist on the use of
original spare parts
.
Failure to comply with these instructions may
compromise the safety and quality of the
product
.
3gb66055.fm Page 50 Friday, February 6, 2004 11:51 AM
(2 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais