Hotpoint SX 1038LS P 0 X Instruções de Utilização descarregar pdf (Página 14)

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

NOTICE

Do not place

or rest anything

on the open door

Make sure that the racks

and dripping pans have been

inserted fully before closing the door

Please read the manual

carefully for information

regarding the automatic

cleaning (pyrolytic) cycle

The “Clock button” and the digits on the

display flash.

Problem Possible causes Solution

The appliance has just been connected to the

electricity mains or there has been a blackout.

Set the clock.

A programmed cooking mode does not

start.

There has been a blackout.

Reprogram the cooking mode.

Only the high luminosity “Clock button”

is lit.

The appliance is in standby mode. Press any button to exit standby mode.

The temperature inside the oven is higher

than the suggested value for the selected

mode.

An automatic mode has been selected.

“Hot” appears on the display and

cooking does not start.

Wait for the oven to cool down.

Fan-assisted cooking has been

selected and the food looks burnt.

Positions 1 and 5: the direct heat could cause

temperature-sensitive foods to burn.

We recommend switching dripping pan

positions halfway through cooking.

Once the automatic cleaning cycle is over

Before you can open the oven door, you will have to wait for the icon to

switch off: this indicates the oven temperature has dropped to an acceptable

level. You will notice some white dust deposits on the bottom and the sides

of your oven; remove these deposits with a damp sponge once the oven

has cooled down completely. Alternatively, you can make use of the already

heated oven, in which case it is not necessary to remove the deposits, they

are completely harmless and will not affect your food in any way.

Troubleshooting

1 2 ... 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Hotpoint SX 1038LS P 0 X Instruções de Utilização Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com não Hotpoint SX 1038LS P 0 X