Hotpoint G641X Instruções de Utilização descarregar pdf (Página 4)

How To Use Your Appliance

Close-up View

A. Gas Burners

B. Support Grid for Cookware

C. Control Knobs for Gas Burners

D. Ignitor for Gas Burners

F. Safety Device (only on certain models) - Activates if

the flame accidentally goes out (spills, drafts, etc.),

interrupting the delivery of gas to the burner.

The position of the corresponding gas burner is indicated on

each control knob.

Gas Burners

The burners differ in size and power. Choose the most

appropriate one for the diameter of the cookware being used.

The burner can be regulated with the corresonding control

knob by using one of the following settings:

• Off

High

Low

To turn on one of the burners, place a lighted match or

lighter near the burner, press the knob all the way in and turn

in the counter-clockwise direction to the "High" setting.

On those models fitted with a safety device (F), the knob

must be pressed in for about 6 seconds until the device that

keeps the flame lighted warms up.

These models are equipped with an ignition switch

incorporated into the control knob. If this is the case, the

ignitor (D) is present (the

symbol is located near each

knob).

To light a burner, simply press the corresponding knob all the

way in and then turn it in the counter-clockwise direction to

the "High" setting, keeping it pressed in until the burner lights.

Caution: If the burner accidently goes out, turn off the gas

with the control knob and try to light it again after waiting at

least 1 minute.

To turn off a burner, turn the knob in the clockwise direction

until it stops (it should be on the “•” setting).

1 2 3 4 5 6 7 8 9 ... 12 13

Sem comentários

Hotpoint G641X Instruções de Utilização Página 4